Cement-Bonded Particle Board

Accessories

Fiber Cement Board

Through Colored Fiber Cement Board





ENTRFRDERUالعربية

/     TR FR DE
Homepage        Products        tepePAN Roof®

tepePAN Roof®

Description
Properties
Packaging / Storage / Handling

tepePAN Roof®


From the Master of Cement Board:


It is a new generation roofing sheet made of cement and fiber mixture, with high bearing capacity, in A1 fire resistance class, resistant to water, moisture and mold.
It is used as a carrier sheet under different roofing products such as tiles and shingles. In low and multi-storey buildings with A1 fire resistance class and superior structural features,
It can be used safely in many different projects (villas, apartments, hospitals, hotels, etc.), especially in adjacent buildings.
 
 
  • TepePAN Roof boards are mounted on the carrier profiles with rust-resistant screws, with the fiber direction of the board perpendicular to each other, with a gap of 5mm between them.
  • The axle spacing of the carrier elements should not exceed 600-625mm.
  • During the application, it is necessary to act on the screwed line.
  • Do not walk on the TepePAN Roof boards that are not fixed to the carrier profiles.
 

Standard Dimensions


Thichness

 13  mm   

Dimensions 

610 x 2440 mm
1220 x 2440 mm
1250 x 2500 mm

**** Special dimensions are possible by cutting the standard production size plates in width and length. Please contact for different thicknesses and sizes.
**** tepePAN Products should be cutted with dry cutting method.

Technical Properties 


Density (kg/m3 ) 

1250 ± 75 

Density (Wet) (kg/m3 ) 
 
1350 ± 100 

Thermal Conductivity Coefficient ( W/mK )

0,2166 

Bending Strength (N/mm2)

>13 > MOR > 7 

Pressure Strength ( MPA )

>8 

Fire Resistance (EN 13501-1)

A1 

Screw Pull-up Resistance  ( According with TS EN 320 ) 
  
>932 N

Breaking Load in Bending  ( Min. - Max. )
 
>1350 - 1450 N

Mold Growth
 
Non-Existence

Water Resistance
 

Waterproof in accordance with TS EN 12467.
 

Edge Type
 

Blunt edge
 

Areas of Usage


Packaging
Packaging

  • Our panels are transported domestically and internationally with the plate edges painted and the Tepe Betopan® emblem.
  • The panels are on wood pallets covered in plastic with rings and corner brackets added.
  • During transport the panels must be covered in canvas.
  • When the panels are being carried one by one they are recommended to be carried vertically or as close as possible to vertical so as not to be bent.
  • The panels must be stored in a closed area.
  • Whether in storage or at the assembly site the panels must be left in lateral position and should not be leaned either laterally or vertically on a wall or similar surfaces.
  • If the panel packages are to be stacked caution should be taken to align them.
  • If the panels are not going to be used for a long period the packages should be completely covered in plastic to avoid being affected from heat and humidity change (stay stable).
  • After panels are taken from the package to be used the package should be covered over again with the plastic.
  • The storage area must be closed.
  • When stacking pallets the pallet feet should be lined up one on top of the other.
  • Do not take the plastic cover off until use.
  • Do not take off the steel strips until use.
  • The materials should be placed on the smoothest ground possible.
  • When storing, pallets should be carefully placed on top of each other with 5 pallets at most  and the total height of pallets should not exceed 3,5 meters.
  • When loading, only two pallets at a time should be loaded.
  • When loading make sure that the pallets are placed on the truck in a balanced way.
  • Pallets ready for transpor
Packaging